不是单独的下载
FollowApp 窗口里的 Autobot 复选框为所选配置文件开启挂机跑图。配置文件、按键绑定、过滤器设置都和 FollowBot 用同一套。如果 FollowBot 已经配好,AutoBot 的设置也就完成了大半。
AutoBot · Path of Exile · 挂机
FollowBot 需要你在玩。AutoBot 不需要。它会选图、洗图、装进地图装置、跑图、捡你的过滤器显示的东西、存仓,再开始下一张——全按你留给它的设置来。
AutoBot 只支持 Path of Exile,不支持 Path of Exile 2。它不是单独的下载——它就是 FollowApp 窗口里的 Autobot 复选框和它背后的选项,和 FollowBot 共用同一套配置文件、按键绑定和过滤器设置。
选图
按 Ideal tier: 选,或者优先选能补全 Atlas(异界地图)的图。
洗图
从你指定的仓库页取图。设置了的话,还会上制图钉、做腐化。
检查词缀
物品数量、物品稀有度、怪物群大小——以及你的 Roll regex:。
装地图装置
六个槽位。第 1 格放地图。
跑图
探索地图,在 Attack dist: 距离内接战,处理你开启的赛季机制和祭坛。
拾取
你的过滤器显示什么,就捡什么。
开门回城并存仓
存进你的仓库页,或者公会仓库。
Portal at: End开始下一张
回到第 1 步,只要你一直开着它。
页面顶部的循环就是这个产品的全部。本页的每项设置,都是那八个步骤中某一步上的一个旋钮。所有设置都在 AutoBot Options 里,可以从主窗口打开,也可以作为 HUD 里的侧边栏打开。
FollowApp 窗口里的 Autobot 复选框为所选配置文件开启挂机跑图。配置文件、按键绑定、过滤器设置都和 FollowBot 用同一套。如果 FollowBot 已经配好,AutoBot 的设置也就完成了大半。
AutoBot 支持 Path of Exile 3.29,不支持 Path of Exile 2。如果你是冲着 Path of Exile 2 刷图来买的,AutoBot 不是你要的——FollowBot 和 CraftBot 倒是两个游戏都支持。
第 6 步只捡你的过滤器显示出来的东西,别的一概不捡。过滤器严不严,决定了仓库里装的是通货还是卖店的垃圾。
你睡觉时 AutoBot 也在自动玩游戏。这比你坐在电脑前看着的自动化暴露更多。
第 1 步和第 3 步。它选哪张图,以及什么样的词缀算够好。
| 设置项 | 功能说明 |
|---|---|
Ideal tier: | 目标地图阶级。 |
Run T17s | 是否允许跑 T17 地图。 |
Atlas completion first | 优先选能补全 Atlas 的图,而不是理想阶级。 |
Min quant % / rarity % / pack % | 地图洗出的词缀至少要达到这个下限,才算够好、值得跑。 |
Roll regex: | 三个百分比表达不了的都放这里,包括你拒绝跑的词缀。不符合这个正则的地图会重洗。 |
第 2 步。地图从哪里来、评判之前要对它做什么,以及设置哪个地图装置选项。
| 设置项 | 功能说明 |
|---|---|
Craft maps from tabs: | 开启地图打造,并填写取图的仓库页编号。用逗号分隔,从 0 开始——最左边的仓库页是 0。 |
Chisel | 洗图之前先给地图上品质。 |
Vaal | 洗完之后腐化。 |
Device option: | 地图装置的打造选项。共 20 个: |
第 4 步。六行,每行有类型和名称。第 1 格是要跑的地图;其余几格放圣甲虫、通货和碎片。
| 槽位 | 类型 | 名称 |
|---|---|---|
| 1 | Map | Crimson Temple |
| 2 | Scarab | Titanic Scarab |
| 3 | Scarab | Harbinger Scarab |
| 4 | Scarab | Scarab of Hunted Traitors 手动输入,不在列表里 |
| 5 | Fragment | Sacrifice at Dusk |
| 6 | (empty) |
(empty)、Map、Scarab、Currency 和 Fragment。地图和圣甲虫选择器会随着你的输入过滤,名称框可以编辑:任何名称都能手动输入。第 4 行就是手动输入的。
内置列表带 30 张地图和 58 种圣甲虫。赛季加了它不认识的东西时,你不用等更新:把 Crafts\NavMapList.txt 或 Crafts\NavScarabList.txt 放在程序旁边,每行一个名称,UTF-8 编码。AutoBot 下次读取时,这个文件会替换内置列表——不需要更新客户端。
Crafts\NavScarabList.txt Titanic Scarab Harbinger Scarab Scarab of Hunted Traitors Anarchy Scarab … one UTF-8 name per line
或者直接在那一行输入名称。两种都行;想让整张列表在每次打开选项时都是对的,就用文件。
第 5 步和第 7 步。它往前探多远、什么时候打、怎么离开。
| 设置项 | 功能说明 |
|---|---|
Portal key: | 传送门放在哪个键上。 |
Portal at: | 在哪里开门离开——Start 或 End。 |
Reveal dist: | 往前探索多远。 |
Attack dist: | 开始接战的距离。 |
Wait ms: | 寻路节奏。 |
Tag entrances | 探索时标记区域入口。 |
Wait for Nameless Seer | Nameless Seer 出现时停下来等。 |
通货从哪里取,捡到的东西存到哪里。
| 设置项 | 功能说明 |
|---|---|
Tabs: | 放打造材料的仓库页编号。和地图页一样从 0 开始。 |
Guild stash | 改从公会仓库取。 |
Delay ms: | 每次仓库操作之间的间隔。网络慢、仓库操作失败时就调高它。 |
一共 13 项。勾上表示去打;不勾表示直接走过。
放它自己跑之前,先关掉你的 BD 应付不了的机制。
一个清图很轻松的角色,照样可能死在一个它没针对过的机制上。上面的 Legion 和 Reflecting Mist 没勾,正是这个原因;你的情况可能不同。
要不要点祭坛、偏好哪一边,以及它接受和不接受的词缀列表。
| 设置项 | 功能说明 |
|---|---|
Use altars | 开或关。 |
Favor: | Top、Bottom 或 Only whitelist。 |
Lists... | 一个对话框,里面有一份有序白名单和一份祭坛词缀黑名单。白名单的顺序就是优先顺序。 |
挂机时最常见的死因就是祭坛。
祭坛的负面词缀作用于整张地图。如果你刚开始让 AutoBot 挂机,先把 Use altars 关掉,再根据是什么杀了你来建黑名单。
给带着辅助角色的刷图号用:等它跟上,而不是把它的光环甩在后面。
| 设置项 | 功能说明 |
|---|---|
Name: | 要等的辅助角色。留空则不监视。 |
Dist: | 领先多远就停下来等。 |
Wait s: | 等多久。 |
一个单独的窗口,显示 AutoBot 在做什么、为什么这么做。在主窗口点 AutoBot HUD 打开——不管 AutoBot 有没有在运行都能打开。四个面板,旁边是选项。
当前区域、连接状态、运行时长,以及地图已揭示了多少。
连接和槽位、角色的生命状态,以及它正在执行的实时任务栈。
一张实时地图,标出怪物、掉落、目标、传送门、入口、墓碑、神龛、箱子、当前寻路目标和不可达区域。平移、缩放、旋转、等距压缩、跟随模式、图例和揭示距离——全都会在会话之间记住。
决策记录,可按分类标签筛选:JOB、NAV、MAP、CBT、ZONE、LOG。隔着一个房间看,已经停掉的自动化和正在等某件事的自动化一模一样,而两者的修法完全不同。Thinking 面板告诉你眼前是哪一种。
完整的 AutoBot Options 作为一栏可滚动的面板嵌在里面。同样的控件,不用开第二个窗口——改一项设置,看记录怎么变。
和 CraftBot 窗口共用一套主题系统。面板大小和位置保存在 Crafts\AutoBotHUD.cfg。
开着 HUD 时,每次跑图都会录制到可执行文件旁的 Crafts\Recordings 里,用于回放和排查问题。HUD 必须开着,录制才会保存。
设置阶段用它。跑几张图、记录都符合你的预期之后,就可以关掉;AutoBot 运行时不需要它开着,但关着的时候不会保存录制。
不支持。AutoBot 只支持 Path of Exile。如果你是为了在 Path of Exile 2 挂机刷图来买的,这不是你要的产品。FollowBot 和 CraftBot 支持 Path of Exile 2,Overlay 则两个游戏都能挂上。
Path of Exile 2 每次补丁都有大幅改动,软件为了保持可用要做的事也跟着变。当前状况请看更新日志,不要想当然。
不是。一个下载,一个程序。FollowBot、AutoBot 和 CraftBot 是同一个可执行文件;你的订阅决定加载哪个。AutoBot 就是 FollowApp 窗口里的 Autobot 复选框和它背后的选项。Overlay 也在同一个下载里,在 Overlay 按钮后面。
如果复选框是灰的,或者加载不了,说明你的订阅里没有它。不是下载坏了。
不用。有两种办法。地图装置每一行的名称框都可以编辑——输入任何名称都行。或者替换整张列表:把 Crafts\NavMapList.txt 或 Crafts\NavScarabList.txt 放在程序旁边,每行一个名称,UTF-8 编码,这个文件就会替换内置列表,无需更新客户端。
先查祭坛:它们是挂机时最常见的死因,因为负面词缀作用于整张地图。把 Use altars 关掉,或者把 Favor: 设为 Only whitelist,配一份短白名单。然后是赛季机制清单:把你的 BD 应付不了的都取消勾选。最后用 Roll regex: 排除你拒绝跑的地图词缀。
调设置时把 HUD 开着。Thinking 面板里的 CBT 和 JOB 行会显示每次死亡前几秒它在做什么。
FollowBot 跟随你正在玩的角色——你得在键盘前。AutoBot 自己跑图:选图、洗图、装图、跑图、拾取、存仓,都不需要你。两者共用同一个客户端、配置文件、按键绑定和过滤器设置;套餐是分开的。FollowBot 按实例数每月 $10 到 $30;AutoBot & CraftBot 每月 $30,一个实例,仅月付。
诊断。Banner 和 Status 面板告诉你它在哪、状态如何;Map 显示它能看到什么、要去哪;Thinking 面板显示为什么。隔着一个房间看,已经停掉的自动化和正在等某件事的自动化一模一样。Thinking 面板就是用来区分两者的——而 Options 侧边栏让你不开第二个窗口就能改好。
它还会录制:开着 HUD 时,每次跑图都会保存到可执行文件旁的 Crafts\Recordings 里,用于回放和排查问题。HUD 必须开着,录制才会保存。
AutoBot & CraftBot,每月 $30。一个实例,仅月付。
加密货币或 PayPal。付款一确认,密钥就会出现在你的概览页上,而且和你的 FollowBot 实例合并在同一个密钥上。看看 CraftBot 能做什么 · 全部价格。
本页是英文页面的译文;价格、退款和条款以英文页面为准。
All Knowing
AutoBot runs maps while you are not at the keyboard. FollowBot needs you to be playing; AutoBot does not. The loop: pick a map by tier or by what completes your Atlas first; roll it from the stash tabs you nominate, chiselling and corrupting if you want; check the roll against your quantity, rarity and pack size thresholds and a regular expression you write; load the map device — six slots, slot one is the map; run it, engaging at the range you set and taking the mechanics and altars you enabled; loot what your filter leaves visible; portal out and stash; start the next one.
It is not a separate download. It is the Autobot checkbox in the FollowApp window and a set of options behind it, using the same profile, keybinds and loot filter setup as FollowBot. If FollowBot is already configured, most of AutoBot’s setup is done.
AutoBot runs Path of Exile only. It does not run Path of Exile 2. And it automates the game while you are asleep, which is more exposure than automation you are sitting in front of — read the ban-risk answer before you buy.
AutoBot & CraftBot is $30 a month, one instance, monthly only. Get access or see every price.
faq.md → “What does AutoBot do?” Nothing else is read at answer time.All Knowing
Everything is in AutoBot Options, reachable from the main window or as a side panel inside the HUD. In order: Map selection — Ideal tier:, Run T17s, Atlas completion first, Min quant % / rarity % / pack %, and a Roll regex: for everything the percentages cannot express. Map crafting — Craft maps from tabs: (comma separated, zero-based, the leftmost tab is 0), Chisel, Vaal, and Device option: with 20 choices from Don’t set through Legion. Map device slots — six rows of type and name; the names are editable, and Crafts\NavMapList.txt / Crafts\NavScarabList.txt beside the executable replace the built-in lists. Exploration — Portal key:, Portal at:, Reveal dist:, Attack dist:, Wait ms:, Tag entrances, Wait for Nameless Seer. Materials — Tabs:, Guild stash, Delay ms:. League mechanics — a checklist of 13, checked means engage. Eldritch altars — Use altars, Favor: Top / Bottom / Only whitelist, and a Lists... dialog. Aurabot — Name:, Dist:, Wait s:.
Two things before you leave it running: untick any mechanic your build cannot handle, and start with Use altars off — altars are the most common cause of unattended deaths.
Each group is a section on this page, with every setting named. Ask about one and I will go into it.
faq.md → “What can I configure in AutoBot?”All Knowing
A separate window showing what AutoBot is doing and why. Open it with AutoBot HUD in the main window. Four areas: Banner — current zone, connection state, uptime, how much of the map is revealed. Status — connection, character vitals, and the job stack it is working through. Map — a live map with markers for monsters, loot, objectives, portals, entrances, gravestones, shrines, chests, its current navigation target and dead zones; pan, zoom, rotate, follow mode and a legend. Thinking — the decision trace, filterable by category: JOB, NAV, MAP, CBT, ZONE, LOG.
The AutoBot Options are available inside the HUD as a side panel, so you do not need both windows open.
Use it while you are setting up. Automation that has stopped and automation that is waiting for something look identical from across the room, and they are fixed in completely different ways. The Thinking pane tells you which one you are looking at.
With the HUD enabled, each map run is recorded under Crafts\Recordings next to the executable, for playback and diagnosis. The HUD must be open for a recording to be saved.
faq.md → “What is the AutoBot HUD?”All Knowing
AutoBot does not. AutoBot runs Path of Exile only. If you are buying for unattended Path of Exile 2 mapping, this is not the product.
FollowBot does — following, fighting, flasks, looting, zoning, profiles, hotkeys and the Process Selector all work, and Path of Exile 2’s own mechanics have their own settings. CraftBot does — the window has a Path of Exile 1 / Path of Exile 2 selector that switches the currency list and the mod pool. The External Overlay attaches to either game.
Path of Exile 2 changes substantially between patches, and so does what the software has to do to keep working. Check the changelog for the current state before you buy.
faq.md → “Does it work with Path of Exile 2?” and the build record 2026-09-26.All Knowing
You do not have to wait for an update. The map and scarab pickers filter as you type, and the name fields in the six map device rows are editable — type any name, and the row uses it. If you want the whole list right, replace it: put Crafts\NavMapList.txt or Crafts\NavScarabList.txt next to the executable, one name per line, UTF-8. The file replaces the built-in list (30 maps, 58 scarabs as shipped) without a client update.
Spelling has to match the in-game name exactly; a name the stash search cannot find, AutoBot cannot find either.
faq.md → “What can I configure in AutoBot?” → map device slots.All Knowing
(Design mock — in the live portal she answers here from the FAQ and the product reference, and says what she read.)
To act on an account — split a licence, reissue a key — sign in first.